Latest gas cylinder valve Tenders | Government gas cylinder valve Tenders

corporations/Associations/Others

CTN :45723624

02 Jul, 2026 6.00 Lacs

Salem - Tamil Nadu

Tender For supply delivery and fixing of motor and accessories at ward-1 selliyampalayam oht in narasingapuram municipality - supply and delivery of kirloskar make 15hp/11kw/2900rpm three phase/415v/50hz/ac/tefc horizontal centrifugal monoblock pump impeller-mechanical seal (head-20mtr,flow rate-2154lpm) size:100x100mm (local quotation) 15hp horizontal centrifugal monoblock pump, labour charges for erection of horizontal shaft, centrifugal pumpset (coupled/monoblock) in bore well/open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of tpic switches starter, voltmeter, ammeter, capacitor single phasing preventor and laying and jointing the cables and twinearthing as per ie rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by eb authorities., three phase panel board star- delta with two level guard and auto start supply and delivery of star-delta starter confirming to is 13947, iec60947-1 and as amended thereafter with suitable kw rating for operation in ac/ three phase/50hz (+/- 5%) and 415v (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., ct operated ammeter (65 mm dia) with suppressed scale,voltmeter (65mm dia),voltmeter selector switch,miniature circuit breaker, thermal overload relay, air break contactors suitable for next standard higher kw rating, single phasing preventor, dry running preventor and on/off push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capa citor is to be taken separately). three phase panel board for 15hp, supply,delivery and fixing of the following materials are listed below etc..,as directed by the departmental ofiicers.for service4 core 16sq.mm pvc copper ug cable, for motor3 core 6sq.mm pvc insulated and sheathed flat type copper cable, 150mm di pipe, 100mm gi pipe , 100mm gi flange set, rubber sheet for flange set, ms bolt and nut20mm dia and above x 90mm to120mm length fully threaded bolts andwith nuts 2 nos. , manhole cover 60 x 60cm (heavy duty) with frame, supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary ms flange of table e , gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the departmental officers. 150mm sluice valve, 100amps 4pole mcb, 100amps porcelain fuse unit (500v), 32mm pipe

Central Government/Public Sector

CTN :45588920

02 Jul, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : 3/4" (20 mm nb) gun metal globe valve , " y" type strainer assembly , double take connecting flange , key actuated oxygen gas cylinder valves

CTN :45253273

01 Jul, 2026 NA

Bhopal - Madhya Pradesh

Tender For bid to ras supply of copper alloy gate valve for waterworks purpose (v2) conforming to is 778 (q3) , rotational moulded polyethylene water storage tanks (v3) conforming to is 12701 (q3) , ready mix plaster 40 kg bag , gi wiremesh of standard width each roll 15 mtrs , plywood bwr grade 12mm thick 7ft by 3ft , cushion 560by530by100mm of 40 density cool foam covered with zip tapestry cloth , hydraulic door closer , sluice valve 200mm cast iron , gi pipe 50mm , epoxy based zink phosphate primer , cushion for chair dining of size 450by450mm covered with zip tapestry cloth , plywood bwr grade 12mm thick 8ftby4ft , gi pipe 25mm medium gde , ms wire mesh of standard width as per sample , curtain rod 3 mtr length 25mm dia , gi pipe 40mm medium gde , ball cock with rod and ball 20mm float valve , liquid water proofing compound dpc , gi pipe 20mm medium gde , sluice valve 100mm cast iron , ball cock with rod and ball 15mm float valve , sluice valve 150mm cast iron , gi pipe 80mm medium gde , ball cock with rod and ball 25mm float valve , plywood bwr grade 12mm thick 6ftby3ft , butt hinges 100mm aluminium alloy anodise , gi pipe 15mm medium gde , m seal , sluice valve 80mm cast iron , tower bolt 150mm aluminium anodised barrel , oil putty for window glass fitting ) /bid number : gem/2026/b/7481230 * /dated: 19-05-2026 & & / bid document 1 / 40

CTN :45709961

02 Jul, 2026 NA

Shimla - Himachal Pradesh

Tender For r/r damages to lwss kotlanallah under jsv section janedghat in tehsil &distt. shimla h.p. (sh:- s/e of 3 hp submersible mono block pump and repair of 2 hp mono block make wilo pump sr. no. 8224564 and prov. and fixing of cast iron sluice valve 65mm dia).

CTN :45709954

04 Jul, 2026 NA

Mandi - Himachal Pradesh

Tender For a/r & m/o wss joginder nagar town in tehsil joginder nagar distt mandi (hp)(sh: - providing and fixing of cast iron sluice valve of various dia)

State Government

CTN :45678034

14 Jul, 2026 28.50 Lacs

Jummu - Jammu And Kashmir

Tender For providing, installation, testing and commissioning of electro-mechanical equipments at newly drilled t/well peerkho. - providing of 3 nos. submersible pump sets :- the job involves providing of 3 nos. submersible pump sets of specification 15000 gph x 80 m head of reputed make (one no. operational and two nos. standby) along with allied accessories to be installed in 10/12 inch dia. deep drilled new tube well peer kho. the job includes fabrication, providing and fitting of 2 no. clamps of span as per the required length to be fabricated and fitted with submersible pump sets with the help of heavy duty bolts and nuts (01 no. clamp to each pump set). the job also includes fabrication of 2 no. graded expander/ reducer for nrv of required size to be fabricated out of suitable thickness ms pipe threaded at one end and flanged at the other end. fitting of reducers/ expanders with 125 mm dia. column pipes at one end with flanged joint and with the discharge outlet of the submersible pumps at the other end.column pipes :- fabrication and providing of 125 mm dia. b class ms 20 nos. column pipes flanged on both ends. the length of each pipe shall be 3 mtrs. and shall be completely leak proof. the ms pipe shall be confirming to relevant isi specifications. the heavy duty flanges shall be furnished properly. one end of the flange shall be faced in such a way that a leak proof joint is made by providing and fitting a rubber sheet in between the two flanges and tightening it with nuts and bolts. each flange shall be provided with 6 no. equidistant holes of required dia. the job also includes welding of flat iron strips at each end for giving extra strength to the flanged joint and providing of 2 no. grooves on each flange on opposite sides for submersible cable to be accommodated though it. the welding of heavy duty flanges with the pipe should be carried out with superior quality pipe welding electrodes. then painting all the pipes with a coat of anti corrosive paint and two coats of super enamel paint. ms well cap, washout and riser pipe :- fabrication and fitting of ms well cap as per casing dia. of 8 mm thickness with one hole of approx 125 mm dia. in the centre and with holes/ cuts at an appropriate distance for passing submersible cable. providing and fitting of an arrangement for gi fitting near the discharge head outlet to provide water feeding to the gravel around the tube well casing. laying of delivery line for making of inter connections of top column pipe of new tube well by way of fabricating 900 ms bend out of 125 mm dia. ms pipe, welding of 2 no flanges one at each end. fabrication and fitting of 125 mm dia. ms pipe connection piece long as per site requirement with 90 degree bend with the help of nuts, bolts, washers, rubber sheet in between for leak proof joint. fitting of 1 no. 125 mm dia. heavy duty c.s. sluice valve through a connection piece as per site condition. fabrication, providing and fitting of 1 mm dia. heavy duty cast steel reflux valve. the sluice and reflux valve shall be confirming the isi standards and shall be of reputed make. fabrication and fitting of another 125 mm dia. connection piece flanged at both ends for working of washout by way of interconnecting delivery pipe through tee joint with the washout pipe.. fabrication and fitting of 1 no. blind flange at the end of washout. painting of exposed parts of the delivery line with two coats of anti rust primer and one coat of super enamel paint. the job also involves fabrication and fitting of one set of u-shaped clamps (for holding 125 mm dia. pipe) on the top column pipe for holding of column assembly on the casing and fabrication of 1 set of u- clamps to be used for extraction/ lowering of pump set along with column assembly. complete job includes cost of material, labour charges and carriage etc. and also making provision for wash out by providing and fitting of sluice valve of c.s of required capacity as per site conditions.lowering of submersible p

State Government

CTN :45686885

03 Jul, 2026 NA

Gondia - Maharashtra

Tender For call for all types of building materials - list, cement isi marks 53 gread (ultratech/acc/birlagold/ambuja), composite cement, steel isi mark (6 mm), steel isi mark (8 mm), steel isi mark (10 mm), steel isi mark (12 mm), steel isi mark (16 mm), steel isi mark (20 mm), centring wire & nail, metal rod (angle), profile sheet 3 x16, profile sheet 3 x12, profile sheet 3 x10, profile sheet 3 x 8, steel square pipe 1 x 2, steel square pipe 1.5 x 2, steel square pipe 2 x 2, steel square pipe 2 x 3, 8 mm metal crusher broken (pachgaon) with roylti, 10 mm metal crusher broken (pachgaon) with roylti, 20 mm metal crusher broken (pachgaon) with roylti, 20 mm metal hand broken (pachgaon) with roylti, 40 mm metal hand broken (pachgaon) with roylti, 40 mm metal crusher broken (pachgaon) with roylti, 80 /100 mm metal hand broken with roylti, sand transport with roylti & all taxes, murum transport with roylti & all taxes, transporting/ carting (murum /malma /mati / material), fly ash bricks is type std size, rcc np-2 second 150 mm pipe with collars, rcc np-2 second class 800 mm pipe with collars, rcc np-2 second 600 mm pipe with collars, rcc np-2 second 450 mm pipe with collars, rcc np-2 second 300 mm pipe with collars, cement seet 4 x 10, rcc tanks for shok pit (mgnrega/sbm) standard size, rcc tanks cap for shok pit (mgnrega/sbm) standard size, indian toilet seet with murga, camod toilet seet with murga, wash besin complete set, hex nut bolt, wooden doors, fyber doors, wooden windows, steel doors, windows and ventilors and grills etc, tiles ceramic, tiles glezz, tiles vetrified, wall tiles, putty per bag, paint primer per ltr, paint regular per ltr, oil paint steel work per ltr, oil paint wall & roof per ltr, washable oil-bound distemper, waret proof cement paint per bag, pevar block 60 mm, pevar block 80 mm, pevar block 100/120 mm, scafolding & shuttering (centering), brass nal (tap) per nos, gi nal (tap) per nos, pvc nal (tap) per nos, brass ferrule 1/2" inch isi mark, mta 1/2" inch isi mark, fta 1/2" inch isi mark, pvc pipe 1/2" inch isi mark, pvc pipe 25 mm dia. isi mark, pvc pipe 32 mm dia. isi mark, pvc pipe 40 mm dia. isi mark, pvc pipe 50 mm dia. isi mark, pvc pipe 60 mm dia. isi mark, pvc pipe 75 mm dia. isi mark, pvc pipe 90 mm dia. isi mark, pvc pipe 110 mm dia. isi mark, pvc pipe 140 mm dia. isi mark, pvc pipe bend, galvanized steel pipe 110 mm dia. isi mark, galvanized steel pipe 90 mm dia. isi mark, galvanized steel pipe 75 mm dia. isi mark, galvanized steel pipe 65 mm dia. isi mark, galvanized steel pipe 32 mm dia. isi mark, galvanized steel pipe 20 mm dia. isi mark, ci sluice valve 75 mm, ci sluice valve 80 mm, ci sluice valve 90 mm, ci sluice valve 110 mm, ci sluice valve 140 mm, non return valve 75 mm, non return valve 80 mm, non return valve 90 mm, non return valve 110 mm, non return valve 140 mm, air valve 75 mm, air valve 90 mm, air valve 110 mm, air valve 150 mm, galvanized steel pipe and fittings 1.50 inch, galvanized steel pipe and fittings 2.00 inch, water tank 500 ltr, water tank 1000 ltr, water tank 2000 ltr, water tank 5000 ltr, green net 90 %, batching and mixing palnt, mixture machine rent, rolar machine rent, jcp rent, vibrator, water tanker, kateri tar, chain link fencing, pvc door (36"x78"), acp door (25"x75"), borewell flashing, borewell drilling, borewell casing pipe iron, borewell casing pipe pvc/cpvc, pv panal 50w per nos, solar street light installation charge per light, solar on-grid plant 1 kw with all charges, led bulb 9 w, led bulb 12 w, led bulb 15 w, led bulb 20 w, led bulb 30 w

State Government

CTN :45671777

03 Jul, 2026 NA

Gondia - Maharashtra

Tender For call for all types of building materials - cement isi marks 53 gread (ultratech/acc/birlagold/ambuja), composite cement, steel isi mark (6 mm), steel isi mark (8 mm), steel isi mark (10 mm), steel isi mark (12 mm), steel isi mark (16 mm), steel isi mark (20 mm), centring wire & nail, metal rod (angle), profile sheet 3 x16, profile sheet 3 x12, profile sheet 3 x10 , profile sheet 3 x 8, steel square pipe 1 x 2, steel square pipe 1.5 x 2, steel square pipe 2 x 2, steel square pipe 2 x 3, 8 mm metal crusher broken (pachgaon) with roylti, 10 mm metal crusher broken (pachgaon) with roylti, 20 mm metal crusher broken (pachgaon) with roylti, 20 mm metal hand broken (pachgaon) with roylti, 40 mm metal hand broken (pachgaon) with roylti, 40 mm metal crusher broken (pachgaon) with roylti, 80 /100 mm metal hand broken with roylti, sand transport with roylti & all taxes, murum transport with roylti & all taxes, transporting/ carting (murum /malma /mati / material), fly ash bricks is type std size, rcc np-2 second 150 mm pipe with collars, rcc np-2 second class 800 mm pipe with collars, rcc np-2 second 600 mm pipe with collars, rcc np-2 second 450 mm pipe with collars, rcc np-2 second 300 mm pipe with collars, cement seet 4 x 10, rcc tanks for shok pit (mgnrega/sbm) standard size, rcc tanks cap for shok pit (mgnrega/sbm) standard size, indian toilet seet with murga , camod toilet seet with murga, wash besin complete set, hex nut bolt, wooden doors , fyber doors , wooden windows, steel doors, windows and ventilors and grills etc, tiles ceramic, tiles glezz , tiles vetrified , wall tiles, putty per bag, paint primer per ltr, paint regular per ltr, oil paint steel work per ltr, oil paint wall & roof per ltr, washable oil-bound distemper, waret proof cement paint per bag, pevar block 60 mm, pevar block 80 mm, pevar block 100/120 mm, scafolding & shuttering (centering), brass nal (tap) per nos, gi nal (tap) per nos, pvc nal (tap) per nos, brass ferrule 1/2" inch isi mark, mta 1/2" inch isi mark, fta 1/2" inch isi mark, pvc pipe 1/2" inch isi mark, pvc pipe 25 mm dia. isi mark, pvc pipe 32 mm dia. isi mark, pvc pipe 40 mm dia. isi mark, pvc pipe 50 mm dia. isi mark, pvc pipe 60 mm dia. isi mark, pvc pipe 75 mm dia. isi mark, pvc pipe 90 mm dia. isi mark, pvc pipe 110 mm dia. isi mark, pvc pipe 140 mm dia. isi mark, pvc pipe bend, galvanized steel pipe 110 mm dia. isi mark, galvanized steel pipe 90 mm dia. isi mark, galvanized steel pipe 75 mm dia. isi mark, galvanized steel pipe 65 mm dia. isi mark, galvanized steel pipe 32 mm dia. isi mark, galvanized steel pipe 20 mm dia. isi mark, ci sluice valve 75 mm, ci sluice valve 80 mm, ci sluice valve 90 mm, ci sluice valve 110 mm, ci sluice valve 140 mm, non return valve 75 mm, non return valve 80 mm, non return valve 90 mm, non return valve 110 mm, non return valve 140 mm, air valve 75 mm, air valve 90 mm, air valve 110 mm, air valve 150 mm, galvanized steel pipe and fittings 1.50 inch, galvanized steel pipe and fittings 2.00 inch, water tank 500 ltr, water tank 1000 ltr, water tank 2000 ltr, water tank 5000 ltr, green net 90 % , batching and mixing palnt, mixture machine rent, rolar machine rent, jcp rent, vibrator, water tanker, kateri tar, chain link fencing, pvc door (36"x78"), acp door (25"x75"), borewell flashing, borewell drilling, borewell casing pipe iron, borewell casing pipe pvc/cpvc, pv panal 50w per nos, solar street light installation charge per light, solar on-grid plant 1 kw with all charges, led bulb 9 w, led bulb 12 w, led bulb 15 w, led bulb 20 w, led bulb 30 w

State Government

CTN :45669630

03 Jul, 2026 NA

Gondia - Maharashtra

Tender For call for all types of building materials - cement isi marks 53 gread (ultratech/acc/birlagold/ambuja), composite cement, steel isi mark (6 mm), steel isi mark (8 mm), steel isi mark (10 mm), steel isi mark (12 mm), steel isi mark (16 mm), steel isi mark (20 mm), centring wire & nail, metal rod (angle), profile sheet 3 x16, profile sheet 3 x12, profile sheet 3 x10 , profile sheet 3 x 8, steel square pipe 1 x 2, steel square pipe 1.5 x 2, steel square pipe 2 x 2, steel square pipe 2 x 3, 8 mm metal crusher broken (pachgaon) with roylti, 10 mm metal crusher broken (pachgaon) with roylti, 20 mm metal crusher broken (pachgaon) with roylti, 20 mm metal hand broken (pachgaon) with roylti, 40 mm metal hand broken (pachgaon) with roylti, 40 mm metal crusher broken (pachgaon) with roylti, 80 /100 mm metal hand broken with roylti, sand transport with roylti & all taxes, murum transport with roylti & all taxes, transporting/ carting (murum /malma /mati / material), fly ash bricks is type std size, rcc np-2 second 150 mm pipe with collars, rcc np-2 second class 800 mm pipe with collars, rcc np-2 second 600 mm pipe with collars, rcc np-2 second 450 mm pipe with collars, rcc np-2 second 300 mm pipe with collars, cement seet 4 x 10, rcc tanks for shok pit (mgnrega/sbm) standard size, rcc tanks cap for shok pit (mgnrega/sbm) standard size, indian toilet seet with murga , camod toilet seet with murga, wash besin complete set, hex nut bolt, wooden doors , fyber doors , wooden windows, steel doors, windows and ventilors and grills etc, tiles ceramic, tiles glezz , tiles vetrified , wall tiles, putty per bag, paint primer per ltr, paint regular per ltr, oil paint steel work per ltr, oil paint wall & roof per ltr, washable oil-bound distemper, waret proof cement paint per bag, pevar block 60 mm, pevar block 80 mm, pevar block 100/120 mm, scafolding & shuttering (centering), brass nal (tap) per nos, gi nal (tap) per nos, pvc nal (tap) per nos, brass ferrule 1/2" inch isi mark, mta 1/2" inch isi mark, fta 1/2" inch isi mark, pvc pipe 1/2" inch isi mark, pvc pipe 25 mm dia. isi mark, pvc pipe 32 mm dia. isi mark, pvc pipe 40 mm dia. isi mark, pvc pipe 50 mm dia. isi mark, pvc pipe 60 mm dia. isi mark, pvc pipe 75 mm dia. isi mark, pvc pipe 90 mm dia. isi mark, pvc pipe 110 mm dia. isi mark, pvc pipe 140 mm dia. isi mark, pvc pipe bend, galvanized steel pipe 110 mm dia. isi mark, galvanized steel pipe 90 mm dia. isi mark, galvanized steel pipe 75 mm dia. isi mark, galvanized steel pipe 65 mm dia. isi mark, galvanized steel pipe 32 mm dia. isi mark, galvanized steel pipe 20 mm dia. isi mark, ci sluice valve 75 mm, ci sluice valve 80 mm, ci sluice valve 90 mm, ci sluice valve 110 mm, ci sluice valve 140 mm, non return valve 75 mm, non return valve 80 mm, non return valve 90 mm, non return valve 110 mm, non return valve 140 mm, air valve 75 mm, air valve 90 mm, air valve 110 mm, air valve 150 mm, galvanized steel pipe and fittings 1.50 inch, galvanized steel pipe and fittings 2.00 inch, water tank 500 ltr, water tank 1000 ltr, water tank 2000 ltr, water tank 5000 ltr, green net 90 % , batching and mixing palnt, mixture machine rent, rolar machine rent, jcp rent, vibrator, water tanker, kateri tar, chain link fencing, pvc door (36"x78"), acp door (25"x75"), borewell flashing, borewell drilling, borewell casing pipe iron, borewell casing pipe pvc/cpvc, pv panal 50w per nos, solar street light installation charge per light, solar on-grid plant 1 kw with all charges, led bulb 9 w, led bulb 12 w, led bulb 15 w, led bulb 20 w, led bulb 30 w

State Government

CTN :45663345

02 Jul, 2026 NA

Gondia - Maharashtra

Tender For call for purchasing of all kind of road and building material under various types schemes in year 2026-27 - list, cement isi marks 53 gread (ultratech/acc/birlagold/ambuja), composite cement, steel isi mark (6 mm), steel isi mark (8 mm), steel isi mark (10 mm), steel isi mark (12 mm), steel isi mark (16 mm), steel isi mark (20 mm), centring wire & nail, metal rod (angle), profile sheet 3 x16, profile sheet 3 x12, profile sheet 3 x10, profile sheet 3 x 8, steel square pipe 1 x 2, steel square pipe 1.5 x 2, steel square pipe 2 x 2, steel square pipe 2 x 3, 8 mm metal crusher broken (pachgaon) with roylti, 10 mm metal crusher broken (pachgaon) with roylti, 20 mm metal crusher broken (pachgaon) with roylti, 20 mm metal hand broken (pachgaon) with roylti, 40 mm metal hand broken (pachgaon) with roylti, 40 mm metal crusher broken (pachgaon) with roylti, 80 /100 mm metal hand broken with roylti, sand transport with roylti & all taxes, murum transport with roylti & all taxes, transporting/ carting (murum /malma /mati / material), fly ash bricks is type std size, rcc np-2 second 150 mm pipe with collars, rcc np-2 second class 800 mm pipe with collars, rcc np-2 second 600 mm pipe with collars, rcc np-2 second 450 mm pipe with collars, rcc np-2 second 300 mm pipe with collars, cement seet 4 x 10, rcc tanks for shok pit (mgnrega/sbm) standard size, rcc tanks cap for shok pit (mgnrega/sbm) standard size, indian toilet seet with murga, camod toilet seet with murga, wash besin complete set, hex nut bolt, wooden doors, fyber doors, wooden windows, steel doors, windows and ventilors and grills etc, tiles ceramic, tiles glezz, tiles vetrified, wall tiles, putty per bag, paint primer per ltr, paint regular per ltr, oil paint steel work per ltr, oil paint wall & roof per ltr, washable oil-bound distemper, waret proof cement paint per bag, pevar block 60 mm, pevar block 80 mm, pevar block 100/120 mm, scafolding & shuttering (centering), brass nal (tap) per nos, gi nal (tap) per nos, pvc nal (tap) per nos, brass ferrule 1/2" inch isi mark, mta 1/2" inch isi mark, fta 1/2" inch isi mark, pvc pipe 1/2" inch isi mark, pvc pipe 25 mm dia. isi mark, pvc pipe 32 mm dia. isi mark, pvc pipe 40 mm dia. isi mark, pvc pipe 50 mm dia. isi mark, pvc pipe 60 mm dia. isi mark, pvc pipe 75 mm dia. isi mark, pvc pipe 90 mm dia. isi mark, pvc pipe 110 mm dia. isi mark, pvc pipe 140 mm dia. isi mark, pvc pipe bend, galvanized steel pipe 110 mm dia. isi mark, galvanized steel pipe 90 mm dia. isi mark, galvanized steel pipe 75 mm dia. isi mark, galvanized steel pipe 65 mm dia. isi mark, galvanized steel pipe 32 mm dia. isi mark, galvanized steel pipe 20 mm dia. isi mark, ci sluice valve 75 mm, ci sluice valve 80 mm, ci sluice valve 90 mm, ci sluice valve 110 mm, ci sluice valve 140 mm, non return valve 75 mm, non return valve 80 mm, non return valve 90 mm, non return valve 110 mm, non return valve 140 mm, air valve 75 mm, air valve 90 mm, air valve 110 mm, air valve 150 mm, galvanized steel pipe and fittings 1.50 inch, galvanized steel pipe and fittings 2.00 inch, water tank 500 ltr, water tank 1000 ltr, water tank 2000 ltr, water tank 5000 ltr, green net 90 %, batching and mixing palnt, mixture machine rent, rolar machine rent, jcp rent, vibrator, water tanker, kateri tar, chain link fencing, pvc door (36"x78"), acp door (25"x75"), borewell flashing, borewell drilling, borewell casing pipe iron, borewell casing pipe pvc/cpvc, pv panal 50w per nos, solar street light installation charge per light, solar on-grid plant 1 kw with all charges, led bulb 9 w, led bulb 12 w, led bulb 15 w, led bulb 20 w, led bulb 30 w

Gas Cylinder Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

State Government

State Government

State Government

State Government

State Government